Bodyboard Features;
Inner Core - 1.9lb Polypro
Stringer - 2 x CFT Stringers
Rails - 55/45 Double Rails
Channels - AKU Concave Hull
Slick - Dupont® Surlyn™ Slick Skin
Deck - WaveCushion 8lb PE Deck Skin with NEW Q12 backing
Tail - Crescent
Additional Features - MESH, Nose Lift, CNC Shaped, XFL Inner Rails, Nose & Tail Guards.
Manufacturing Country - Indonesia
Understanding this bodyboard's technology
 |
1.9lb Kinetic PP (Indonesia)
Lightweight fusion foam compressed at 1.9lb offering instant recoil, enhanced stiffness and compression strength. This foam is 100% waterproof and ideal in mild to warm temperatures.
|
 |
Carbon Fibre/ CFT Stringer
Lightweight filament wound carbon composite rod offering rigidity and durability.
|
 |
55/45 Rails
This rail setup leaves less of your rail in the water and offers the riderless contact with the water and therefore better drive and speed throughout all conditions.
|
 |
DuPont Surlyn Slick
Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
|
 |
Wavecushion 8lb NXLPE (Indo) Decking
Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
|
| Q12 |
Q12 Backing
Higher density crosslinked PP foam backing layer delivers more resilient nose and tail seam fusion and increases board strength.
|
 |
Full Crescent Tail
The full crescent tail is the most control-oriented bodyboard tail. This tail will perform when turning and carving. Using the full length of the crescent allows maximum mobility and water flow.
|
 |
Mesh
Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
|
 |
CNC Shaping
Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
|
 |
Manufacturing Country: Indonesia/ Broady
Bodyboards that come from Indonesia come out of Nick Mesritz’s factory. Nick Mesritz is the owner and shaper of both NMD and VS bodyboards and has more than 20 years experience in shaping, testing and creating wavecraft.
|
-
|
Bodyboard Size
|
Nose
|
Wide Point
|
NTWP
|
Tail
|
Finished Thickness
|
|
42"
|
9 1/4" |
21 1/4" |
19 7/8" |
18 "
|
53mm |
|
43"
|
9 1/2" |
21 5/8" |
19 7/8" |
18 5/8" |
56mm |
