Season 2023

VS Dave Winchester Mini Quad 1.5lb PP Bodyboard

$419.95 AUD

The Versus Project introduces the Winny X4 MiniQuad, the Winchester curve is fitted with the new X4 MiniQuad perfect for slicing off the bottom and dicing the open face.

Board Performance

Quad WiFly PP Parabolic performance bar

Size: 41

41
42
43

Colour: Royal Blue Deck/ Grey Slick

Royal Blue Deck/ Grey Slick
White Deck/ Orange Slick
More payment options

Guarantee safe & secure checkout

afterpayamerican expressapple paygoogle paymasterpaypalshopify payvisa
Delivery & ReturnAsk a Question
Features

  • Core - 1.5lb Polypro
    Stringer - 1 x CFT Stringer
    Rails - 55/45 Double Rails
    Channels - MiniQuad Concave
    Slick - Dupont® Surlyn™
    Deck - WaveCushion 8lb PE Deck Skin with NEW Q12 backing
    Tail - Clipped Crescent
    Additional Features - MESH, CNC Shaped, XFL Inner Rails, Nose & Tail Guards, Bull Grip Nose Bulbs.
    Manufacturing Country - Indonesia

    Understanding this bodyboard's technology

    1.5lb Kinetic PP (Indonesia)
    Constructed from premium grade 1.9lb and 1.5lb density Polypropylene Kinetic Core delivers amazing projection and response as high pressure cell-fusion created during the blanks manufacturing process. Kinetic Core is a warm water core available in various reinforcement configurations, each tuned-in for specific wave conditions.
    CFT Stringer INformation at INverted Bodyboarding
    Carbon Fibre/ CFT Stringer
    Lightweight filament wound carbon composite rod offering rigidity and durability.
    55 45 Rail information at Inverted Bodyboarding
    55/45 Rails
    This rail setup leaves less of your rail in the water and offers the rider less contact with the water and therefore better drive and speed throughout all conditions.
    MiniQuad Concave
    The X4 MiniQuad takes the key design factors of our groundbreaking full-length QuadConcave and shrinks it down, focusing on the back half of the board. Starting below the wide-point, the X4 essentially splits the hull in two, combining the glide and flow of a flat bottom with the drive and directional control of the QuadConcave.  The X4 MiniQuad is designed to excel in small to medium size surf and for quicker transitions closer to the pocket of the wave.
    Surlyn plastic bodyboarding information at INverted
    DuPont Surlyn Slick
    Surlyn plastic is thin and durable making it the most popular top end slick. Surlyn plastic will bend and stretch before it creases or snaps. This is a must have for intermediate through to advanced riders.
    Wave core PE deck skin on a bodyboard
    Wavecushion 8lb NXLPE (Indo) Decking
    Wavecushion decking is a 8lb decking foam. Much like the PE core, the PE decking is soft and flexible. Unlike the PE core, PE decking is used on all top end boards as for the flex and softness which allows riders to create a foam memory. Despite being soft and flexible PE is still extraordinarily durable.
    Q12 Q12 BAcking
     Higher density crosslinked PP foam backing layer delivers more resilient nose and tail seam fusion and increases board strength.
    Clipped Crescent Tail information at Inverted bodyboarding
    Clipped Crescent Tail
    The clipped crescent tail is the most popular crescent tail option.  This tail will perform when driving, turning, carving and releasing. Clipping the tail allows the rider to maximise their drive and maintain control through the outer concaves and clipped areas.
    Mesh information at Inverted Bodyboarding
    Mesh
    Mesh is a diamond shaped wire like plastic that runs under the slick of a bodyboard. Mesh creates a durable reinforcement between the bodyboards slick and the core making it stiffer, stronger and less likely to crease.
    Nose bulb information at Inverted bodyboarding
    Nose Bulbs
    Nose bulbs are a slightly raised area of foam on the nose of the board which create a comfortable spot to grip the nose.
    CNC Shaping information at Inverted Bodyboarding
    CNC Shaping
    Short for “computer numerical control”, CNC machines allow shapers to cut boards perfectly to the mm. CNC machines offer the sharpest possible finish to bodyboard manufacturing.
    Indonesia bodyboard manufacturing information at Inverted Bodyboarding
    Manufacturing Country: Indonesia/ Broady
    The Broady bodyboard factory started in New Zealand in the 80’s but relocated to Indonesia in the early 2000’s. With two of the industries leading shapers at the helm, the Broady Factory uses CNC shaping, buzztech heat lamination and purpose built Aku Shaping in order to produce high performance bodyboards for most of the world’s leading brands.
Reviews